Print Settings - Epson PLQ-35 User Manual

Print settings

Settings
Orientation
*
Page Order
*
Pages per Sheet
*
Draw Borders
Paper Source
User Defined Paper
Offset
Paper Size
*
Copy Count
Graphic - Print Quality
Advanced Printing Features
Pages per Sheet Layout
Halftoning
*
Print Optimizations
Print Speed
Print Direction
Explanations
Select Portrait or Landscape.
Select whether to print from front to back or back to front.
Select the number of pages that you want to print onto a single page.
Select to print a border around the pages.
Select the paper source you want to use.
If your paper is not included in the Paper Size drop-down list, you can add the size to the
list. For more details, see Help for the printer driver.
This setting allows you to offset the image on the page. That is, you can adjust the
position of the printed image. If the offset you specify moves a portion of the image out
of the printer's printable area, that portion will not be printed.
Select the size of the paper you want to use. If you do not see your paper size, use the
scroll bar to scroll through the list. If your paper size is not included in the list, see
"Definition of Custom Paper Size" on page 32 for instructions.
Select the number of copies you want to print. When you select more than one, this
check box is displayed and you can select whether to collate the copies.
Select the printing resolution you want. The higher the resolution you select, the more
detailed your printout will be; however, increasing the resolution slows printing.
* Select Enable or Disable for the metafile Spooling.
* Select the layout direction for the pages you want to print.
Select the type of halftoning to use when printing graphics. To let the printer deter-
mine the best halftone quality, use Auto Select.
Select Disable when the printer does not use the device fonts and select Enable when
the printer uses the device fonts.
This setting allows you to select print speed. When Standard is selected, prints in
standard printing mode. When High Speed is selected, prints in high speed printing
mode.
This setting allows you to select bidirectional printing. Selecting the Printer Setting
will use the setting stored in the printer. Selecting Bidirectional will print in bidirec-
tional printing mode. Selecting Unidirectional will print in unidirectional printing
mode.
Make sure that Bi-D is selected as the Print Direction setting stored in the printer.
Otherwise this setting is ignored by the printer.
PLQ-35 User's Guide
Printer Software 31