Mitsubishi Electric SUZ-KA24NAHZ Service Manual page 98

OPERATING PROCEDURE
11. Removing the reactor (DCL)
(1) Remove the service panel. (See Photo 1)
(2) Remove the top panel. (See Photo 1)
(3) Remove the electrical parts box. (See Photo 4)
(4) Remove 6 reactor fixing screws (4 × 10) and remove the
reactors.
Note 1: The reactor and capacitor is attached to the rear of the
electrical parts box.
Note 2: The 3 pieces of reactors to be replaced must have the
same color of sticker. (Green, Orange, or Blue)
12. Removing the compressor (MC)
(1) Remove the service panel. (See Photo 1)
(2) Remove the top panel. (See Photo 1)
(3) Remove the electrical parts box. (See Photo 4)
(4) Remove the cover panel front. (Refer to procedure 8)
(5) Remove the cover panel rear. (Refer to procedure 8)
(6) Remove the valve bed. (Refer to procedure 8)
(7) Remove the side panel (R). (Refer to procedure 8)
(8) Remove 3 separator fixing screws (4 × 10) and remove
the separator.
(9) Remove the comp felt for compressor.
(10) Recover refrigerant.
(11) Remove the welded pipe of compressor inlet and outlet
then remove the compressor.
(12) Remove the 3 points of the compressor fixing nut using a
spanner or a adjustable wrench.
Note: Recover refrigerant without spreading it in the air.
13. Removing the power receiver
(1) Remove the service panel. (See Photo 1)
(2) Remove the top panel. (See Photo 1)
(3) Remove the electrical parts box. (See Photo 4)
(4) Remove the cover panel front. (Refer to procedure 8)
(5) Remove the cover panel rear. (Refer to procedure 8)
(6) Remove the valve bed. (Refer to procedure 8)
(7) Remove the side panel (R). (Refer to procedure 8)
(8) Recover refrigerant.
(9) Remove 4 welded pipes of power receiver inlet and outlet.
(10) Remove 2 receiver leg fixing screws (4 × 10).
Note: Recover refrigerant without spreading it in the air.
OCH754A
PHOTOS/FIGURES
Photo 10
Electrical parts box
Reactor
fixing
screws
Photo 11
Separator Comp felt
Compressor
fixing nuts
98
Reactors (DCL)
Compressor
(MC) Valve bed
Pipes of power
receiver
Power receiver
Receiver leg
Receiver leg
fixing screws