Dimplex BPH100M Instruction Manual page 9

NOTE:
Your heater may produce some noise during
operation. This noise is caused by the expansion
and contraction of the element as it changes
temperature, and is normal for this type of
product. Whilst the noise produced is usually
very quiet, certain environmental factors can
make it more noticeable, such as hard fl ooring
or minimal furnishings If you believe that the
expansion noise is excessive, please contact us.
The heater controls can be easily adjusted by using the six buttons on the User
Interface.
1. The Home Screen shows the options available at each stage
of adjustment. Here the current target temperature (setpoint)
is displayed along with the mode of operation. Any use of the
Advance function will be displayed here, and pressing Enter
will show the functions which are enabled.
The currently active mode of operation is displayed at the top of
the screen e.g. 'Out All Day' timer.
When the heater is trying to achieve or maintain a room temperature, 'Heating On' will be displayed, otherwise,
'Heating O ' will be displayed.
When the controller buttons have not been pressed for a long period of time, the display will 'sleep' and the text
will disappear. The heater is still on and active in whatever Mode it was set to.
2. Menu - Displays the Main Menu;
- Boost – Activate Boost Mode
- Modes - Set the mode of operation.
- Settings – Time/Date, Temperature units etc.
3. Back returns to the previous screen.
4. The Up and Down buttons are used to navigate through the menus and adjust the required room temperature
on the main screen. The screen colour changes based on the temperature selected, showing deep blue through
to bright red.
5. Enter is used to enter sub menus and to confi rm actions.
6. The Advance button is only used when a Timer Mode is active, it allows the timer schedule to be changed
temporarily by forcing a Heating On period to begin or end early. For more information, see page 15.
NOTE:
Should the heater fail to operate,
this may be caused by the room
temperature being higher than the
thermostat setting.
Out All Day
21 °
C
Heating ON
9