Dimplex BPH100M Instruction Manual page 18

Settings
To navigate to the settings menu, from the home screen:
Press the Menu button to access the Main Menu. Use the
Up / Down buttons to highlight 'Settings', then press the
Enter button. Each of the following headings relate to
an item in the settings menu.
Heater Lock
Set Lock
Heater (PIN) Lock can be enabled here by highlighting 'Heater Lock' and pressing the Enter Button to enter the
Heater Lock menu. Highlight 'Set Lock', press the Enter Button, enter a 4-digit PIN code, then pressing the Enter
Button to lock the heater.
Lock Settings
Before UI Lock is enabled, the User can select 'Lock Settings' to enable/disable the Advance and/or Boost
functions, as well as enable/disable modifi cation of the Boost Temperature and Boost Duration. See below.
Boost Lock
Three settings can be modifi ed within this Menu:
• Enable / Disable - The 'Boost' Menu Item can be Enabled/Disabled while PIN Lock is active.
• Temperature Rule - Modifi able Boost Temperature while Heater (PIN) Lock is active
- Enable – While Boost is active, the User can modify this value as they normally would
- Disable – Default value will be loaded. When the user tries to modify the value, the UI will
show the following text: 'Disabled'.
• Duration Rule - Modifi able Boost Duration while Heater (PIN) Lock is active.
Advance UI Lock Settings
Enable / Disable - This setting allows the User to Enable or Disable the Advance button while Heater
(PIN) Lock is active.
18
Main Menu
ADVANCE
MENU
Boost
BACK
Modes
Settings
ENTER
Settings
Heater Lock
Boost
Setback
Date/Time
Sound
v