Dimplex BPH100M Instruction Manual page 16

Product Locks
Product Locks are methods of locking the heater's controller to restrict access to functions. This can be activated
and confi gured via the Advanced Settings Menu.
When Product Lock is activated, the heater continues to run in whichever mode is currently active and any/all
wireless communications remain active if enabled.
Child Lock
This locking method does not utilise a PIN code and is toggled on/o
holding the Back and Enter buttons for three seconds. It is a full Product lock with no exception rules.
PIN Lock
In PIN Lock, all UI buttons other than the Menu button are disabled unless Advance has been enabled during UI
Lock (see section 'Product Lock Settings' on page 18).
In the Main Menu all buttons are active. Two items can be selected:
Boost – Activates Boost Mode. This function can be restricted, see below.
Unlock - Selecting 'Unlock' prompts the User to complete the unlock action for the currently active.
16
Manual
21 °
C
Heating ON
PIN Unlocked
on the heater's controller by pressing and
Menu
Boost
Unlock
PIN Lock
134--
Enter 4 Digit
PIN