COMPONENTS
Oven Sensor
1. Refer to page 3-13 for the servicing procedure
2. Measure the resistance after cooling down
Conv. heater
1. Remove wire leads
2. Measure resistance after cooling down
Door switch
1. Refer to page 3-7 for the servicing procedure
2. Measure the resistance after cooling down
TEST PROCEDURE
(Multiple meter scale: R x 1000)
(Multiple meter scale: R x 1)
Normal: Approximately
1.09 kΩ ± 10%
If not replace
NOTE: Ω Value was tested at room temperature
Normal : Approximately 27Ω
Abnomal : Infinite(opened)
NOTE: Ω Value was tested at room temperature
Door open
Continuity
-4-2-
RESULTS
(77F/25˚C)
(77F/25˚C)
Be careful the element is sensitive to
temperature.
Door closed
Infinite