Removing The Broil Element - LG LRE3061ST Service Manual

• DISCONNECT power supply cord from the outlet
before servicing.
• Replace all panels and parts before operating.
• RECONNECT all grounding devices.
- Failure to do so can result in severe personal injury, death or
electrical shock.
• Be careful when you work on the electric range
handling the sheet metal part.
- Sharp edge may be present and you can cut yourself.
1. Turn off the electrical supply going to the range.
2. Open the oven door and remove the racks from inside the oven.
3. To remove the outer broil element:
a) Remove the 4 screws from the front and rear brackets.
2 front bracket screws
2 upper bracket screws
COMPONENT ACCESS

REMOVING THE BROIL ELEMENT

WARNING
CAUTION
* 2 screws of the rear bracket do not only fasten broil heater's rear bracket
but also a thermistor. While servicing broil elements, the thermistor also
should be disassembled.
b) Pull the element forward so that you can access the terminals and
disconnect the wires.
3 terminals(Broil heater/thermistor)
-3-7-