• DISCONNECT power supply cord from the outlet
before servicing.
• Replace all panels and parts before operating.
• RECONNECT all grounding devices.
- Failure to do so can result in severe personal injury, death or
electrical shock.
• Be careful when you work on the electric range
handling the sheet metal part.
- Sharp edge may be present and you can cut yourself.
1. Remove the oven door from the range
(See page 3-14 for the procedure).
2. Place the oven door on a padded work surface with the front glass
facing down.
3. Remove 2 screws.
COMPONENT ACCESS
REMOVING THE OVEN DOOR HANDLE
WARNING
CAUTION
4. Turn the door over. Remove 3 screws from the door cover assembly
and detach the bracket
5. Lift the door cover assembly out and put it down.
6. To remove the door handle;
- Remove 2 screws from plastic door deco and the handle can be detached
from the door cover assembly.
-3-12-
Bracket
Door Deco