Adjusting The Image; Selecting The Projection Quality (Color Mode); Switching The Screen Between Full And Zoom (Aspect) - Epson EH-TW5750 User Manual

Adjusting the Image

Adjusting the Image

Selecting the Projection Quality (Color Mode)

You can obtain the optimum image quality to suit your surroundings when projecting. The brightness of the
image varies depending on the mode selected.
a
Press the [Menu] button to display menus in the order Image - Color Mode.
c
If you press the [Home] button on the control panel or the home button on the remote control,
you can also make settings from the Home screen.
b
Use the up and down buttons to select a mode, and then press the [Enter] button to confirm
the selection.
Mode
Dynamic
Bright Cinema
Natural
Cinema

Switching the Screen Between Full and Zoom (Aspect)

You can change the Aspect of the projected image to match the input signal's type, aspect ratio, and
resolution.
The available settings vary depending on the image signal currently being projected.
c
Note that using the aspect ratio function of the projector to reduce, enlarge, or split the projected
image for public viewing with the aim of making a profit may infringe upon the rights of the copyright
holder of that image based on copyright law.
Remote control
This is the brightest mode. Best for prioritizing brightness.
Best for projecting vivid images.
Best for faithfully reproducing the color of the source image.
Best for enjoying content such as movies.
Control panel
p.24
s
Application
32