Table of Contents
Advertisement
Configuration Menu
Configuration Menu Table
If there is no image signal being input, you cannot adjust items related to the Image or Signal in the
Configuration menu. Note that the items displayed for the Image, Signal, and Info vary depending on the
image signal being projected.
Image menu
Function
Color Mode
Dynamic, Bright Cinema, Natural, Cinema
Brightness
Contrast
Color Satura-
tion
Tint
Sharpness
White Balance
Color Temp.
Custom
Frame Interpo-
Off, Low, Normal, High
*1
lation
Image Preset Mode
Image En-
*1
hancement
Noise Reduction
MPEG Noise Reduction
Detail Enhancement
Advanced
Gamma
RGBCMY
Menu/Settings
Off, Preset 1 to Preset 5 Select the settings prepared in advance as
Strength, Range
2, 1, 0, -1, -2, Dark Gam-
ma Uplift, Custom
Reset
R/G/B/C/M/Y
Hue, Satura-
tion, Bright-
ness
51
Explanation
Select a color mode based on your sur-
roundings and the image you are projec-
ting.
p.32
s
Adjusts the brightness when the image
appears too dark.
Adjusts the contrast between light and
shade in the images. By increasing the
contrast, the images become vivid.
Adjusts the color saturation for the im-
ages.
Adjusts the tint for the images.
Adjusts the image sharpness.
Adjusts the overall color of the image. The
image is tinted blue for high values, and
tinted red for low values.
Adjusts the offset and gain for each R, G,
and B color.
Adjusts the smoothness of the movement
of the image.
the settings for Noise Reduction, MPEG
Noise Reduction, and Detail Enhance-
ment.
Adjusts the roughness of the image.
Smoothes out rough images in MPEG for-
mat.
Creates a more emphatic texture and ma-
terial feel of the image.
Performs gamma adjustments. You can
*2
,
select a raw value or adjust using a custom
value.
p.39
s
Adjusts the Hue, Saturation, and Bright-
ness for each R, G, B, C, M, and Y col-
or.
p.38
s
Advertisement
Table of Contents
