Pin
❺
❺
Align the pin with
the pin hole.
– 5 –
3-1-2. Setting up the X feed
mechanism and the table
1) Detach the package.
2) Detach the fixing plate. Put the screw and
nut you have detached in the accessory
box.
3) Remove rubber plugs ❺ . Tighten the
screws that are placed under the rubber
plugs with a wrench. Then, attach rubber
plugs ❺ .
4) Move the clamp to the center of the X
feed mechanism before removing six nuts
in order to prevent the clamp from inter-
fering with screws when attaching them.
5) Take care not to allow the screws from
slipping off the mounting holes after de-
taching the nuts.
Put the nuts you have removed in the
accessory box.
* Store the tools in the accessory box.