Maintenance And Storage; Environmental Protection - IVT JS-400 Instruction Manual

Instruction manual
plunge the saw blade slowly into the workpiece.
∙ After reaching the required cutting depth, bring the
machine again to the normal working position so that
the complete surface of the base plate rests on the
EN
workpiece and continue to saw along the cutting line.
[F4]
∙ After completing the cut, first switch «off» the
machine an then pull it out of the cut.
Circle cutting (circle cutting guide is not included)
[F5]
∙ Mark the circle which will be cut and drill the
opening in its centre.
∙
If the cutting does not start from the edge of the
material, drill the opening from which the cutting will start.
∙
Mount the circular guide on the machine.
∙ Slide the circular guide in order to determine the
radius of cutting and lock it using the locking screws.
∙
Place the aligning pin in the central opening and
start the cutting by moving the device over the circle.
In order to get the optimal results it is recommended
to use the narrow blades.

MAINTENANCE AND STORAGE

Before any work on the device itself,
pull the mains plug.
∙ Always keep the tool and the ventilation slots (if
present) cleaned. Regular cleaning and maintenance of
the appliance will ensure efficiency and prolong the life
of your tool.
∙
If the tool should fail despite the rigorous
manufacturing and testing procedures, the repair should
be carried out by an authorized IVT customer service.
∙ Keep all nuts, bolts, and screws tight, to be sure the
tool is in safe working condition.
∙
Replace worn or damaged parts for safety.
∙ Use only original spare parts. Parts not produced
by manufacturer may cause poor fit and possible injury.
∙
Store the tool in a dry room out of reach of kids and
away from any flammable material.
∙
Never wet the device or spray water on it!

ENVIRONMENTAL PROTECTION

Recycle raw materials instead of
disposing as waste.
Tool, accessories and packaging should be sorted for
environment-friendly recycling.
The plastic components are labeled for categorized
recycling. These instructions are printed on recycled
paper manufactured without chlorine.
10