Volume Overview; Checking Partition Or Volume Properties; Formatting A Partition Or Volume - Dell PowerVault 750N System Administrator Manual

The following topics are discussed:
•

Volume overview

• Checking volume properties
•

Formatting a partition or volume

• Deleting a partition or volume
Volume Overview
A volume is a logical entity that is made up of portions of one or more physical disks. A
volume can be formatted with a file system and can be accessed by a drive letter.
Like disks, volumes can be basic or dynamic. In Array Manager, basic volumes refer to all
volumes that are not on dynamic disks. Dynamic volumes are logical volumes created from
dynamic disks with Array Manager.
In your system, create all data volumes and dynamic volumes on dynamic disks. Only the
operating system drive should remain basic because of system recovery limitations.

Checking Partition or Volume Properties

Right-click the partition or volume to be checked.
1
Choose Properties from the context menu.
2
The Properties window displays.
Check the properties for your volume.
3
Formatting a Partition or Volume
Right-click the volume or partition you want to format and then click Format.
1
Choose NTFS as the file system type.
2
NOTE: The PowerVault 750N and 755N only supports NTFS partitions. Formatting all
partitions as NTFS allow for advanced features only available under that file system.
Enter a label for the volume.
3
The label appears on the Array Manager console. If a name has been selected, this
name appears in the Name field. You can change the name by typing a different name.
Enter an allocation size or use the default, which is automatically selected.
4
A dva n c e d D i s k a n d Vo l u m e M a n ag e m e n t U s i n g A r ra y M a n a g e r
3-17