Modifying Share Properties; Removing A Share; Removing A Protocol From The Share - Dell PowerVault 750N System Administrator Manual

Use the protocol tabs to configure the specific properties of each type of share.
5

Modifying Share Properties

Use the Shares page to view and modify share properties.
To modify share properties, perform the following steps:
On the NAS Manager primary menu, click Shares.
1
On the Shares page, click Shares.
2
In the Object/Task Selector, select the share for which the properties will be modified.
3
On the Shared Folders page, in the Tasks list, click Properties.
4
The General property page is displayed. Use this page to change the name, path, and
description of the share. You can also select the type of client from which the share is
accessible.

Removing a Share

You can remove shares entirely, or you can disable one or more protocols. When you remove a
share, access to the share is removed; however, the actual files remain on the NAS appliance.
To remove a share and all protocols for that share, perform the following steps:
On the NAS Manager primary menu, click Shares.
1
On the Shares page, click Shares.
2
In the Shared Name list on the Shared Folders page, select the share that is to be
3
removed.
In the Tasks list on the Shared Folders page, click Delete.
4
A confirmation dialog appears.
Click OK to confirm the deletion, or click Cancel to keep the share.
5

Removing a Protocol From the Share

To remove one or more specific protocols from a share, perform the following steps:
On the NAS Manager primary menu, click Shares.
1
2-6 N A S M a n a g e r
NOTE: Services for NetWare (SFN) are compatible with Novell NetWare Bindery service
for authentication and file access using the internetwork packet exchange/sequenced packet
exchange (IPX/SPX) network protocol. You must log into the NAS appliance using a
Netware client before you can connect to the NetWare shares.