Minimum Hardware And Connection Requirements; Software Requirements; Configuring Console Redirection On The System; Table 7-2. Terminal Emulation Types - Dell PowerVault 750N System Administrator Manual

Minimum Hardware and Connection Requirements

To use console redirection, you must have the following:
• An available serial port (COM port) on a client system (This port must not conflict
with any other ports on the system.)
• Available serial port 1 (COM 1) on the NAS appliance
• A null modem cable to connect the server to the client system

Software Requirements

Your remote terminal emulation software should meet the following specifications:
• American National Standards Institute (ANSI) or VT100/220 terminal emulation with
a window size of 80 x 25 characters
• 9600, 19.2K, 57.6K, or 115.2K bits per second (bps) via serial (COM) ports
• Recommended: the ability to create keyboard command macros
All versions of the Microsoft
terminal emulation software. However, the version of HyperTerminal included with most
Windows operating systems does not provide the correct screen size, the arrow and function
keys do not work, and there is no method of creating macros. It is recommended that you
either upgrade your version of HyperTerminal to HyperTerminal Private Edition 6.1 or later
or select new terminal emulation software. You may be eligible for a free upgrade from your
current version of HyperTerminal from Hilgraeve at http://www.hilgraeve.com.

Configuring Console Redirection on the System

Console redirection is enabled by default for VT100/220 using serial port 1 (COM 1). If you
decide to reconfigure console redirection or disable it, go through the system setup
program. The Console Redirection field allows you to select only the terminal type. The
options available are listed in Table 7-2.
Ta b l e 7 - 2 .
Terminal Type
ANSI
VT100/220
7-30 Adv a n c ed Fe a tu r es
NOTE: Console Redirection is enabled by default in the NAS appliance BIOS.
®
Windows
Te r m i n a l E m u l a t i o n Ty p e s
Terminal Emulation
ANSI. Used for utility partition applications or MS-DOS.
VT100/220. Used for utility partition applications or MS-DOS.
®
operating systems come with HyperTerminal