Removing An Adapter From A Network Team - Dell PowerVault 750N System Administrator Manual

Enter the team name and select the appropriate team mode. The types of team
7
include Smart Load Balance and Fail Over, FEC/GEC, and Link Aggregation
(IEEE 802.3ad).
Click OK.
8
Select the team name in the Configuration box.
9
Select an unassigned adapter to add to the team and click > adjacent to Team
10
Members to add the adapter. Repeat for the second adapter.
NOTE: Alteon and Broadcom Ethernet adapters can be grouped into failover teams with an
Intel 82559 LOM; however, assigning a LOM to be a primary adapter is not supported.
Click OK.
11

Removing an Adapter From a Network Team

To remove an adapter from a network team through the Network Teaming utility, Broadcom
Advanced Server Control Suite, perform the following steps:
Click Maintenance.
1
Click Terminal Services.
2
Log into the Terminal Services session as administrator.
3
Under Administrative Tools on the Advanced Administration Menu, click Broadcom
4
Network Teaming. The Broadcom Advanced Server Control Suite window is
displayed on the desktop.
Click the tab on the Load Balance/Virtual LAN folder.
5
Select the team name in the Configuration box.
6
Select an adapter in Team Members and click < adjacent to Team Members to
7
remove the adapter.
Click OK to apply the change.
8
Ad v a n c ed Fe a tu r e s
7-7