Advertisement
bizhub C4050i/C3350i
2. SETUP WIZARD
• Use of the Setup Wizard function allows those items that need to be set during the setup procedure to be extracted from the Service Mode
and set.
• This enables efficient selection and setting of Service Mode functions during the setup procedure.
NOTE
▪ The specific function may be set either via the "Service Mode" or the "Setup Wizard". The setting made last is the valid setting.
Starting procedure
1. Call the initial screen of Service Mode.
2. Press the following keys in this order.
• Stop -> 3
3. Touch the [Prev.] key or [Next] key to select the mode.
e.g.
Exiting procedure
1. Touch [Service]. The home Service Mode screen reappears.
2. Touch [Exit].
3. Turn OFF the main power switch. Wait 10 seconds, then turn ON the main power switch again.
I-2
I SERVICE MODE > 2. SETUP WIZARD
Advertisement
