Improper Use - Bosch Rexroth DBA 1X E Series Operating Instructions Manual

Pump safety block
Table of Contents

Advertisement

10/56
Safety instructions
Bosch Rexroth AG, DBA...1X/...E, RE 25880-B/10.18
Please consult us for information on the use of the product with other hydraulic
fluids.
The safety valve may only be operated in a technically unobjectionable condition
and it may only be stored, operated and maintained according to the technical data,
operating and environmental conditions indicated in these operating instructions.
Particularly the limit values specified in "Data sheet 25880" must not be exceeded.
The valve may only be used with other connection, application and performance
data than those defined in these operating instructions with the written approval by
Bosch Rexroth AG.
Changes at the product are only admissible within the scope specified in these
operating instructions.
Any safeguards fitted by Bosch Rexroth AG have to be present, properly installed and
fully functional, unless this is not appropriate for setup or maintenance operation.
Their position must not be changed; they must not be circumvented or made
ineffective.

2.3 Improper use

The safety valve is not suitable for use in potentially explosive environment; it must
not be used there.
The safety valve may not be used if the maximum possible flow of the system in all
imaginable operating states exceeds the value indicated in the technical data for the
relevant valve type as maximum admissible flow. The admissible maximum flow is
indicated in "Data sheet 25880".
The safety valve must not be used as high-response valve.
The safety valve must not be operated with corrosive operating media or in corrosive
atmosphere.
A sealing at the safety valve must not be removed by the machine end-user.
Only persons authorized by accredited testing authorities according to the EU
Pressure Equipment Directive may remove the lead seal or re-adjust the response
pressure.
The safety valve must not be disassembled to an extent exceeding the one specified
in these operating instructions.
Name plates and product identifications may not be lacquered over but must be kept
in a readable condition.

Advertisement

Table of Contents
loading

Table of Contents