Bosch Rexroth DBA 1X E Series Operating Instructions Manual page 8

8/56 About this documentation
Bosch Rexroth AG, DBA...1X/...E, RE 25880-B/10.18
Safety instructions are structured as follows:
Type and source of danger!
Consequences in case of non-compliance
▶ Hazard avoidance measures
▶ <Enumeration>
• Warning sign: draws attention to the danger
• Signal word: identifies the degree of danger
• Type and source of danger: specifies the type and source of danger
• Consequences: describes the consequences in case of non-compliance
• Precaution: specifies how the danger can be prevented
Table 2: Risk classes according to ANSI Z535.6-2006
Warning sign, signal word
DANGER
WARNING
CAUTION
NOTICE
1.3.2 Symbols
The following symbols indicate notices which are not safety-relevant but increase the
comprehensibility of the documentation.
Table 3: Meaning of the symbols
Symbol Meaning
If this information is not observed, the product cannot be used and/or
operated optimally.
▶ Individual, independent action
1.
Numbered instruction:
The numbers indicate that the actions must be carried out one after the
2.
other.
3.
SIGNAL WORD
Meaning
Indicates a dangerous situation which will cause death or
severe injury if not avoided.
Indicates a dangerous situation which may cause death or
severe personal injury if not avoided.
Indicates a dangerous situation which may cause minor or
moderate (personal) injury if not avoided.
Damage to property: The product or the environment could
be damaged.