Custom Installation - Dell 1230c User Manual

N : If your printer is not already connected to the
OTE
computer, the following window will appear.
• After connecting the printer, click Next.
• If you don't want to connect the printer at this time, click
Next, and No on the following screen. Then the installation
will start and a test page will not be printed at the end of the
installation.
• The installation window that appears in this User's
Guide may differ depending on the printer and
interface in use.
5
After the installation is finished, a window asking you to
print a test page appears. If you choose to print a test
page, select the checkbox and click Next.
Otherwise, just click Next and skip to step 7.
6
If the test page prints out correctly, click Yes.
If not, click No to reprint it.
7
Click Finish.
N : After setup is complete, if your printer driver doesn't
OTE
work properly, reinstall the printer driver. See "Reinstalling
Printer Software" on page 5.

Custom Installation

You can choose individual components to install.
1
Make sure that the printer is connected to your computer
and powered on.
2
Insert the supplied CD into your CD drive.
The CD should automatically run, and an installation
window appears.
If the installation window does not appear, click Start then
click Run. Type X:\Setup.exe, replacing "X" with the
letter which represents your CD drive and click OK.
If you use Windows Vista, click Start → All programs →
Accessories → Run, and type X:\Setup.exe.
4
Installing Printer Software in Windows
If the AutoPlay window appears in Windows Vista, click
Run Setup.exe in Install or run program field, and
click Continue in the User Account Control window.
3
Click Next.
• If necessary, select a language from the drop-down list.
• View User's Guide: Allows you to view the User's
Guide. If your computer doesn't have Adobe Acrobat,
click on this option and it will automatically install Adobe
Acrobat Reader for you.
4
Select Custom. Click Next.