Materials; Environmental Conditions - Invacare Action 3 Junior User Manual

CAUTION!
– The tyres pressure have to be equal in both
wheels to avoid a less driving comfort, to keep
the brakes efficiency and an easy propelling of
the wheelchair.

11.3 Materials

Frame/backrest tubes
Upholstery (seat and backrest)
Push handles
Plastic parts like brake handles,
clothes guards, foot plates,
armpads and parts of most
options
Folding mechanism / vertical
brace / clamping parts / castor
forks
Screws, washers and nuts
All materials used are protected against corrosion.
We use only REACH compliant materials and
components.
Theft and metal detection systems: in seldom cases
the materials used in the wheelchair may activate
theft and metal detection systems.
1608517-C
Aluminum, Steel
Foam PUR, Fabric Nylon
and Polyester
PVC
Thermoplastic (e.g.
PA, PP, ABS and PUR)
according to marking
on the parts
Aluminum, Steel
Steel

11.4 Environmental conditions

Storage and
transportation
Temperature
-20 °C to 40 °C
Relative humidity 20 % to 90 % at 30 °C, not condensing
Atmospheric
pressure
Be aware that when a wheelchair has been stored
under low temperatures, it must be adjusted to
chapter 8 Maintenance, page 52 before use.
Technical Data
Operation
-5 °C to 40 °C
800 hPa to 1060 hPa
61