Headrest - Invacare Action 3 Junior User Manual

Invacare® Action 3 Junior
Adjusting the length
The posture belt has the good length, when there's
just sufficient space for a flat hand between body
and belt.
1. Shorten or extend the loop D as required.
2. Thread loop D through catch A and plastic buckle E
until the loop is flat.
If this adjustment is not sufficient, it might be required to
re-fit the posture belt at the fixations.
Fitting the posture belt at the fixations
CAUTION!
– Thread the belt loop through both plastic
buckles to avoid the belt from loosening.
– Do the adjustments on both sides equally,
so that the buckle clasp remains in a central
position.
– Make sure that the belts do not get caught in
the spokes of a rear wheel.
28
1. Thread the loop F through the fixation on the chair G
and then through BOTH plastic buckles H.

4.3 Headrest

The height; depth and angle adjustments are
operated by the combination of the headrest scissor
brackets position.
1608517-C