Materials; Environmental Conditions - Invacare Action 2 NG User Manual

Invacare® Action 2 NG

11.3 Materials

Frame/backrest tubes
Upholstery (seat and backrest)
Push handles
Plastic parts like brake handles,
clothes guards, foot plates,
armpads and parts of most
options
Folding mechanism / vertical
brace / clamping parts / castor
forks
Screws, washers and nuts
All materials used are protected against corrosion.
We use only REACH compliant materials and
components.
Theft and metal detection systems: in seldom cases
the materials used in the wheelchair may activate
theft and metal detection systems.

11.4 Environmental conditions

Storage and
transportation
Temperature
-20 °C to 40 °C
58
Aluminum, Steel
Foam PUR, Fabric Nylon
and Polyester
PVC
Thermoplastic (e.g.
PA, PP, ABS and PUR)
according to marking
on the parts
Aluminum, Steel
Steel
Operation
-5 °C to 40 °C
Relative humidity 20 % to 90 % at 30 °C, not condensing
Atmospheric
pressure
Be aware that when a wheelchair has been stored
under low temperatures, it must be adjusted to
chapter 8 Maintenance, page 49 before use.
800 hPa to 1060 hPa
1608216-C