Materials; Environmental Conditions - Invacare Action 4 NG Series User Manual

Tyre
Solid tyre:
305 mm (12");
515 mm (20"); 560 mm
(22"); 610 mm (24")
Solid tyre:
150 mm (6"); 140 mm (5"
1/2); 125 mm (5"); 200
mm (8")
Pneumatic tyre:
200 mm (8")
The compatibility of the tyres listed above depends
on the configuration and/or model of your
wheelchair.
In case of a tyre puncture consult a suitable
workshop (e.g. bike repair shop, bicycle dealer ...) to
have the tube replaced by a skilled person.
The size of the tyre is mentioned on the sidewall of
the tyre. The change of appropriate tyres must be
carried out by a qualified technician.
CAUTION!
– The tyres pressure have to be equal in both
wheels to avoid a less driving comfort, to keep
the brakes efficiency and an easy propelling of
the wheelchair.
1608637-E
Max. pressure
- - -
- - -
2.5 bar 250 kPa 36 psi

11.3 Materials

Frame/backrest tubes
Upholstery (seat and backrest)
Push handles
Plastic parts like brake handles,
clothes guards, foot plates,
armpads and parts of most
options
Folding mechanism / vertical
brace / clamping parts / castor
forks
Screws, washers and nuts
All materials used are protected against corrosion.
We use only REACH compliant materials and
components.
Theft and metal detection systems: in seldom cases
the materials used in the wheelchair may activate
theft and metal detection systems.

11.4 Environmental conditions

Storage and
transportation
Temperature
-20 °C to 40 °C
Technical Data
Aluminum, Steel
Foam PUR, Fabric Nylon
and Polyester
PVC
Thermoplastic (e.g.
PA, PP, ABS and PUR)
according to marking
on the parts
Aluminum, Steel
Steel
Operation
-5 °C to 40 °C
73