Headrest - Invacare Action 2 NG User Manual

Adjusting the length
The posture belt has the good length, when there's
just sufficient space for a flat hand between body
and belt.
1. Shorten or extend the loop D as required.
2. Thread loop D through catch A and plastic buckle E
until the loop is flat.
If this adjustment is not sufficient, it might be required to
re-fit the posture belt at the fixations.
Fitting the posture belt at the fixations
CAUTION!
– Thread the belt loop through both plastic
buckles to avoid the belt from loosening.
– Do the adjustments on both sides equally,
so that the buckle clasp remains in a central
position.
– Make sure that the belts do not get caught in
the spokes of a rear wheel.
1608216-C
1. Thread the loop F through the fixation on the chair G
and then through BOTH plastic buckles H.

4.3 Headrest

The height and the removal are operated by the
handwheel. The bar is equipped with an adjustable
stop block.
Height adjustment
Options
27