6. Do one of the following to install the M.2 solid-state and its bracket:
• Type one: Align the contact edge of the new M.2 solid-state drive with the key in the slot. Then,
carefully insert the drive into the slot
the bracket
3
.
• Type two: Install the new M.2 solid-state drive on the bracket
drive with the bracket into the drive slot
7. Reinstall the base cover assembly.
8. Turn over the computer. Connect the ac power adapter and all disconnected cables to the computer.
Keyboard (for ThinkPad X13 Gen 1)
Prerequisite
Before you start, read Generic Safety and Compliance Notices and print the following instructions.
42
T14s Gen 1 and X13 Gen 1 User Guide
1
. Then, Put the bracket in place
2
. Then, install the screw to secure the bracket
2
. Install the screws to secure
1
and insert the new M.2 solid-state
3
.