Replacement procedure
Note: You might be instructed to slide the keyboard frame forward or backward in some of the following
steps. In this case, ensure that you do not press or hold the keys while sliding the keyboard frame.
Otherwise, the keyboard frame cannot be moved.
1. Disable the built-in battery. See "Disable the built-in battery" on page 35.
2. Turn off the computer and disconnect the computer from ac power and all connected cables.
3. Take the tool out of the new keyboard package. Insert the tabs
TrackPoint buttons and the trackpad
TrackPoint buttons. Then, remove the two Trackpoint buttons
4. Loosen the screws that secure the keyboard.
1
. Slightly pivot the tool downward
a
and
b
into the slot between the
2
to release the left and right
3
.
.
Chapter 6
CRU replacement
43