1060 Cable Guide (For Thinkpad X13 Gen 4 Only) - Lenovo ThinkPad X13 Yoga Gen 4 Hardware Maintenance Manual

Step Screw (quantity)
2
M2 × 2.5 mm, flat-head, nylon-coated (1)
When installing:
• For wireless WAN card with two antenna cables: ensure that you connect the orange cable to the main
connector, and the blue cable to the auxiliary connector.
• For wireless WAN card with four antenna cables: ensure that you connect the orange cable to the main
connector, the blue cable to the auxiliary connector, the white and grey cable to the M1 connector, and
the black and grey cable to the M2 connector.
Note: If the Wireless WAN card thermal pad is damaged during replacement, remove the Wireless WAN
card thermal pad as below and apply a new one on the system board.

1060 Cable Guide (for ThinkPad X13 Gen 4 only)

For access, remove these FRUs in order:
• "1020 Base cover assembly" on page 69
Removal steps
Color
Black
2a
.
Chapter 8 Removing or replacing a FRU
Torque
0.181 Nm
(1.85 kgf-cm)
75