Dell Inspiron 8100 Solution Manual page 58

HINT: If the memory
module is not installed
properly, the computer
will not boot. No error
message indicates this
failure.
58 Ad di ng Par ts
NOTICE:
To prevent damage to the computer, do not use tools to spread the
inner metal tabs of the connector when you are installing or removing a
memory module.
If you are replacing a memory module, you must remove the existing
6
module:
Use your fingernails to carefully spread apart the inner metal tabs
a
of the memory module connector.
The module should pop up.
Lift the memory module away from the connector.
b
Install the memory module:
7
Align the notch in the module with the slot in the center of the
a
connector.
Slide the edge of the module firmly into the connector, and rotate
b
the module down until you hear a click.
memory
module
securing clip