docking connector
eject/locking
lever
Undocking the Computer
NOTICE:
If you do not have a charged battery installed in the computer when
you undock the computer, you may lose unsaved data.
NOTICE:
If you do not use correct undocking procedures, you may lose data
and the computer may not restart.
Save and close any open files and exit any open programs.
1
Perform one of the following procedures:
2
•
Click the Start button, and then click Eject PC.
After a few seconds, the computer power light turns off.
•
Press the undock request button on the APR.
After a few seconds, the green docking light turns off.
Slide the eject/locking lever on the left side of the APR to the eject
3
position to undock the computer.
alignment rails (2)
A d di n g Par ts
55