V
E R I F Y T H A T T H E P R I N T E R I S R E C O G N I Z E D B Y
Click the Start button, point to Settings, and then click Printers.
1
If the printer is listed, right-click the printer icon, click Properties, and then
select the Details tab (Ports tab in Windows 2000).
Ensure that the Print to the following port: setting is LPT1 (Printer Port).
2
R
E I N S T A L L T H E P R I N T E R DR I V E R
If you cannot print to a USB printer
V
E R I F Y T H E P R I N T E R C A B L E C ON N E C T I ON S
cable is connected as described on page 17.
T
E S T T H E E L E C T R I C A L O U T L E T
by testing it with another device, such as a lamp.
E
N S U R E T H A T T H E P R I N T E R I S T U R N E D O N
supplied with the printer.
V
E R I F Y T H A T T H E P R I N T E R I S R E C O G N I Z E D B Y
Click the Start button, point to Settings, and then click Printers.
1
If the printer is listed, right-click the printer icon, click Properties, and then
select the Details tab (Ports tab in Windows 2000).
Ensure that the Print to the following port: setting is USB.
2
R
E I N S T A L L T H E P R I N T E R DR I V E R
Modem Problems
NOTICE:
Connect the modem to an analog telephone wall jack only.
Connecting the modem to a digital telephone network damages the modem.
C
H E C K T H E T E L E P H O N E J A C K
modem and connect it to a telephone. Listen for a dial tone.
W
I N D O W S
—
See page 16.
—
Ensure that the printer
—
Ensure that the electrical outlet is working
—
See the documentation
W
I N D O W S
—
See page 16.
—
Disconnect the telephone line from the
—
So l v i ng P ro bl e m s
33