Hunter Lantern Bay 59581 Installation Manual page 11

Align the keyhole slots in the
cage with the partially installed
screws in the light fixture. Lift the
cage and twist counterclockwise
to lock it into place.
Ceiling Bracket Downrod
Installing the Glass and Light Fixture Cage
Carefully lower the glass
into the light fixture cage
until it rests in place.
Make sure the globe assembly is securely
attached to the switch housing. Failure to
properly secure all three assembly screws
could result in the light fixture falling.
Hanging Fan Wiring
Fixture
Screws
Fixture
Screw
IMPORTANT
Canopy Blades
bag
Fixture
Screws
Partially install two fixture screws,
found in the hardware bag,
halfway into the light fixture as
shown. It does not matter which
two screw holes you choose.
bag
Install the third fixture
screw and tighten all
three screws securely.
Light Bulbs/Cage Remote Cradle
1886
2 of 6
Fixture Screw
1 of 6
Fixture Screw
10