Dell OptiPlex GX1 Reference And Installation Manual page 98

parallel/serial port 1
connectors (stacked)
(PARALLEL/SERIAL1)
mouse/keyboard
connectors (stacked)
(MOUSE/KYBD)
USB connectors
(USB) (2)
serial port 2
connector
(SERIAL2)
microprocessor
fan connector (FAN)
CD-in
connector (CD-IN)
video
connector MONITOR)
optional
integrated NIC
connector (ENET)
microphone jack (MIC)
audio line-out
jack (LINE-OUT)
audio line-in
jack (LINE-IN)
6-2 Dell OptiPlex GX1 and GX1p Mini Tower Managed PC Systems Reference and Installation Guide
DIMM sockets (3)
telephony
(DIMM_A–DIMM_C)
connector
(TAPI)
ATI multimedia
riser board connector (RISER)
connector (AMC)
Expansion cards are installed on the computer's riser board (see Figure 6-3). The riser
board plugs into the RISER connector on the system board (see Figure 6-1) and is
considered an extension of the system board.
The system accommodates up to seven expansion cards, which can be a mix of 32-bit
PCI expansion cards and 8- and 16-bit ISA expansion cards. (See Figure 6-2 for exam-
ples of ISA and PCI expansion cards.)
3.3-V power
battery socket
input connector
(BATTERY)
(POWER_2)
system board jumpers
control panel
connector (PANEL)
chassis intrusion
switch connector
main power input
connector (POWER_1)
SEC cartridge connector
(SLOT1)
front of computer
video-memory
upgrade socket
(VIDEO_UPGRADE)
primary EIDE
interface connector
(IDE1) (pin-1 corner)
secondary EIDE
interface connector
(IDE2) (pin-2 corner)
diskette/tape drive
interface connector
(DSKT) (pin-1 corner)