Dell OptiPlex GX1 Reference And Installation Manual page 45

NOTE: Non-Plug and Play devices appear in this list as Adapters without ID
support .
When determining the order of devices to boot from, the system first considers the
order of the devices listed under the Device Controller Priority option, then the order
of devices under Boot Device Priority.
To specify your priority preferences, order the devices under these options so that the
highest-priority controller is at the top of the Device Controller Priority option and the
highest-priority device is at the top of the Boot Device Priority option. Order the
remainder of the devices in the Boot Device Priority option according to your prefer-
ences. Move any devices that you want the system to ignore during system start-up
into the Exclude From Boot Device Priority option.
NOTE: The system defines drive C in the Boot Device Priority option as the first hard-
disk drive attached to the highest-priority device controller. Therefore, if you have a
SCSI adapter installed in your computer and you want the SCSI drive 0 to be drive C,
you must move the SCSI adapter item to the top of the Device Controller Priority
option.
To change the order of the devices, press <Ctrl> and the up- or down-arrow key. If you
want to revert to the original Boot Device Priority option settings, press <Ctrl><Del>.
NOTE: If you exit the Device List option by pressing <Esc> or <Alt><b> without mak-
ing any changes, the Boot Sequence option is set to the Device List option.
Dell Computer Corporation (www.dell.com)
Device List
Boot Device Priority:
Diskette drive A
LANDesk Service Agent for 3C090X
Hard drive C:
CD-ROM device
Exclude from Boot Device Priority:
Device Controller Priority:
System BIOS boot devices
Ctrl-Del original list
System OptiPlex 400 MTbr Setup
C
Ctrl , move item trl
Using the System Setup Program
BIOS Version: XXX
The DEVICE LIST contains devices
that may be bootable. The system
attempts to boot from the devices
in the list as ordered. If you
ESC or ALT-B from this menu, the
displayed order becomes the boot
selection.
Ctrl-Ins moves items between "Boot
Device Priority" and "Exclude
from Boot Device Priority" only.
PgDn next 1 of 2
®
Pentium II Processor 400 MHz
Level 2 Cache: 512 KB Integrated
32 MB SDRAM
System Memory:
4 MB SGRAM
Video Memory:
XXXXX
Service Tag:
XXXXX
Asset Tag:
return Ctrl-Ins move to other list
PgUp prev
2-11