NOTE: After modifying the system configuration, you must turn off the system to
install, remove, or change jumper settings on the non-Plug and Play ISA expansion
cards to match the settings you selected in the ICU.
Unlisted cards are non-Plug and Play ISA expansion cards that do not have configura-
tion files stored in the ICU database.
NOTE: If you want to add a configuration file that you received on diskette with a new
expansion card, see " Adding a Listed Card" found earlier in this chapter.
To add an unlisted card with the ICU, perform the following steps:
A dialog box appears listing the names of all available cards of that type.
The Configure Unlisted Card dialog box appears with blank fields.
For example, if you click the box beneath IRQ, the button changes to Add Inter-
rupt. When you click this button, a Specify dialog box (in this case, Specify
Interrupt) appears. Figure 3-7 shows the Configure Unlisted Card dialog box with
the Specify Interrupt dialog box opened.
Using the ISA Configuration Utility
3-9