Cisco Catalyst 3650 Command Reference Manual page 66

show lacp
Field
Port State
This is an example of output from the show lacp neighbor command:
Switch> show lacp neighbor
Flags: S - Device is sending Slow LACPDUs
Channel group 3 neighbors
Partner's information:
Port
Gi2/0/1
Partner's information:
Port
Gi2/0/2
This is an example of output from the show lacp sys-id command:
Switch> show lacp sys-id
32765,0002.4b29.3a00
The system identification is made up of the system priority and the system MAC address. The first two bytes
are the system priority, and the last six bytes are the globally administered individual MAC address associated
to the system.
Layer 2/3 Command Reference, Cisco IOS XE Release 3.6E (Catalyst 3650 Switch)
62
A - Device is in Active mode
Partner
System ID
32768,0007.eb49.5e80
LACP Partner
Port Priority
32768
Partner
System ID
32768,0007.eb49.5e80
LACP Partner
Port Priority
32768
Description
State variables for the port, encoded as individual bits
within a single octet with these meanings:
• bit0: LACP_Activity
• bit1: LACP_Timeout
• bit2: Aggregation
• bit3: Synchronization
• bit4: Collecting
• bit5: Distributing
• bit6: Defaulted
• bit7: Expired
In the list above, bit7 is the MSB and bit0 is
Note
the LSB.
F - Device is sending Fast LACPDUs
P - Device is in Passive mode
Partner Partner
Port Number Age Flags
0xC 19s SP
Partner Partner
Oper Key Port State
0x3 0x3C
Partner Partner
Port Number Age Flags
0xD 15s SP
Partner Partner
Oper Key Port State
0x3 0x3C
Layer 2/3 Commands
OL-32639-01