Advertisement
With some switchboards it
may be helpful to dial a pause
after entering the switchboard
access code, e.g. 9, 11 etc. to
enable you to get an outside
line.
This feature automatically
inserts a pause between the
access code and the telephone
number that you have entered
in the Phonebook. However
for this feature to work you
must still enter the access
code at the front of the
telephone number when
storing in the Phonebook.
Press the
the menu.
Use the
scroll to SETUP.
Press the
Use the
scroll to PABX.
Press the
Use the
scroll to PBX 1.
Press the
Display shows PIN?.
Enter PIN number.
Press the
Enter the access code.
61
button to enter
button to
button.
button to
button.
button to
button.
button.
Press the
button.
You can also adjust the length
of the pause to be inserted.
There are two options available,
3 or 5 seconds to be set to suit
the switchboard:
Press the
button.
Use the
button to
scroll to SETUP.
Press the
button.
Use the
button to
scroll to PABX.
Press the
button.
Use the
button to
scroll to PAUSE.
Display shows 3 SEC.
Use the
button to
scroll to 5 SEC.
Press the
button. You will
hear a confirmation tone.
Advertisement
