Advertisement
Press and hold the
button on the base unit until
the current setting is
announced, then release.
Press and release the
button to move through the
settings, with each press the
options will be announced
and will also be shown on the
base unit display, i.e 8, 9,
Time Saver, 2, 3, 4, 5, 6, 7.
When you hear the setting
you want, do not press the
short delay your chosen
setting will be announced.
Press and release the
button.
The current setting will be
announced and also shown on
the base unit display.
37
button again. After a
When audible message is switched ON
and new messages have been received,
your BT Freelance XA 3000 will beep
every 10 seconds. The volume of the
beep is at the volume you have set for
the loudspeaker. The default setting is
OFF.
Press and hold the
button on the base unit to
change the setting.
The prompt will announce
"Message alert on/off" as
appropriate.
Advertisement
