Dell G7 15 7500 Service Manual page 79

Table 16. System setup options—Virtualization menu (continued)
Virtualization
Enable Intel VT for Direct I/O
Table 17. System setup options—Performance menu
Performance
Multi-Core Support
Active Cores
Intel SpeedStep
Enable Intel SpeedStep Technology
C-States Control
Enable C-State Control
Enable Adaptive C-States for Discrete
Graphics
Intel Turbo Boost Technology
Enable Intel Turbo Boost Technology
Intel Hyper-Threading Technology
Enable Intel Hyper-Threading Technology
Dynamic Tuning:Machine Learning
Enable Dynamic Tuning:Machine Learning
Table 18. System setup options—System Logs menu
System Logs
BIOS Event Log
Clear Bios Event Log
Thermal Event Log
Clear Thermal Event Log
Enables or disables the computer to perform Virtualization Technology for Direct I/O
(VT-d). VT-d is an Intel method that provides virtualization for memory map I/O.
Default: ON
Changes the number of CPU cores available to the operating system. The default
value is set to the maximum number of cores.
By default, All Cores is selected.
Enables or disables the Intel SpeedStep Technology to dynamically adjust processor
voltage and core frequency, decreasing average power consumption and heat
production.
Default: ON
Enables or disables the CPU's ability to enter and exit low-power states.
Default: ON
Allows the computer to dynamically detect high usage of a discrete graphics and
adjust the computer parameters for higher performance during that time period.
Default: ON
Enabled or disabled the Intel TurboBoost mode of the processor. If enabled, the Intel
TurboBoost driver increases the performance of the CPU or graphics processor.
Default: ON
Enabled or disabled the Intel Hyper-Threading mode of the processor. If enabled, the
Intel Hyper-Threading increases the efficiency of the processor resources when
multiple threads run on each core.
Default: ON
Enables or disables OS capability to enhance dynamic power tuning capabilities based
on detected workloads.
Default: OFF
Select keep or clear BIOS events.
By default, Keep is selected.
Select keep or clear Thermal events.
System setup 79