Steps
1.
Fold the keyboard
cable.
2. Align the screw holes on the keyboard and keyboard bracket with the screw holes on the palm-rest and keyboard assembly.
3. Replace the 41 screws (M1.2x2.5) that secure the keyboard bracket to the palm-rest and keyboard assembly.
Next steps
1. Install the touchpad.
2. Install the
G
key.
3. Install the
system
board.
4. Install the
I/O
board.
5. Install the
light
bar.
6. Install the
power button with optional fingerprint
7. Install the
power-adapter
8. Install the
graphics-card
9. Install the
processor
fan.
10. Install the
memory
modules.
11. Install the
M.2 2280 solid-state drive
12. Install the
wireless
card.
13. Install the
display
assembly.
14. Install the
rear-cover
bracket.
15. Install the
rear
cover.
16. Install the
coin-cell
battery.
17. Install the battery.
18. Install the
base
cover.
19. Follow the procedure in
64
Removing and installing components
reader.
port.
fan.
or
M.2 2230 solid-state
After working inside your
computer.
drive.