Dell G7 15 7500 Service Manual page 73

Table of Contents

Advertisement

Table 7. System setup options—Display menu
Display
Display Brightness
Brightness on battery power
Brightness on AC power
Touch Screen
Full Screen Logo
Table 8. System setup options—Connection menu
Connection
Network Controller Configuration
Wireless Device Enable
Enable UEFI Network Stack
Enable UEFI Network Stack
Wireless Radio Control
Control WLAN radio
Table 9. System setup options—Power menu
Power
Battery Configuration
Advanced Configuration
Enable Advanced Battery Charge
Configuration
Peak Shift
Sets the screen brightness when the computer is running on battery power.
Default: 50
Sets the screen brightness when the computer is running on AC power.
Default: 0
Enables or disables the touch screen for the OS.
NOTE:
The touch screen will always work in the BIOS setup irrespective
of this setting.
Enabled or disabled the computer to display full screen logo if the image match
screen resolution.
Default: OFF
Enables or disables the network controller.
By default, Integrated NIC is selected.
Enable or disable internal WLAN/Bluetooth devices.
By default, WLAN is selected.
By default, Bluetooth is selected.
When enabled, UEFI networking protocols are installed and available, allowing pre-OS
and early OS networking features to use any enabled NICs. This may be used without
PXE turned on.
Default: ON
Enables to sense the connection of the computer to a wired network and
subsequently disable the selected wireless radios (WLAN and/or WWAN). Upon
disconnection from the wired network, the selected wireless radios are re-enabled.
Default: OFF
Enables the computer to run on battery during power usage hours. Use the below
options to prevent AC power usage between certain times of each day.
By default Adaptive is selected.
Enables Advanced Battery Charge Configuration from the beginning of the day to a
specified work period. Advanced Battery Charged maximizes battery health while still
supporting heavy use during the work day.
Default: OFF
Enables the computer to run on battery during peak power usage hours.
Default: OFF
System setup
73

Advertisement

Table of Contents
loading

This manual is also suitable for:

P100f

Table of Contents