Dell G7 15 7500 Service Manual page 12

Steps
1. Remove the six screws (M2x5) that secure the base cover to the palm-rest and keyboard assembly.
2. Loosen the two captive screws that secure the base cover to the palm-rest and keyboard assembly.
CAUTION: Do not pull on or pry the base cover at the side where the hinges are located; doing so may damage the
base cover.
NOTE: Loosening the two captive screws on the base cover creates a gap which can be used to pry and lift the base
cover off the palm-rest and keyboard assembly.
12 Removing and installing components