SATO CL4NX Plus Driver Manual page 9

Connecting via LAN Cable
1. Power off the product.
2. Connect the LAN cable to the product.
Connect the LAN cable to the connector shown in the figure.
3. Connect the LAN cable according to your network environment.
4. Configure the network settings.
For details on the network settings, refer to "CL4NX Plus Operator Manual."
Connecting via Wireless LAN (When the Optional Wireless LAN Kit Is Installed)
Check whether the wireless LAN kit is installed to the product.
For details on the wireless LAN network settings, refer to "CL4NX Plus Operator Manual."
9