SATO CL4NX Plus Driver Manual page 77

Advanced settings
[Set fixed document length for continuous label]
Feed the entire label to an appropriate position after the product finishes printing. For a
continuous label, the one label is the feed amount because the feed amount cannot be
determined by the sensor.
[Non-standard protocol output]
Substitute and output part of the control code as ASCII readable characters. This feature is
for host environments that cannot use binary data.
[Cancel all current and queued printing documents]
Delete all jobs from the product buffer. Use this setting when you want to cancel the
preceding jobs and print a new job immediately.
Caution
You cannot cancel this command. Take care when using it.
[Send static elements only on first page (Overlay function)]
All static elements will be sent to only the first page of the print job. Only variable elements
will be sent for subsequent pages. Static elements are called from the product memory.
[Use legacy calendar print command]
Print the calendar by using the legacy <WA> command. If the option is unchecked, <WU>
command is used instead.
[Use legacy RFID locking command]
Lock the RFID tag using the legacy "lck" command. If the option is unchecked, "lc2"
command is used instead.
Export to printer
[Format number]
This setting is used when the XML-Enabled feature is used. For details, refer to
"XML-Enabled Reference."
77