Page Setup - SATO CL4NX Plus Driver Manual

4.1

Page Setup

Printer settings
[Stock]
Select the default stock from the registered stock. If you select [Custom], you can set
[Width], [Height], and [Sensors] on this screen.
[Custom stock has ID 257]
This check box enables compatibility with older SATO printer drivers that require a custom
stock ID of greater than 256.
[Copies]
Specify the number of labels to be issued.
Media settings
[Width]
This setting shows the width set for the stock that you selected. If you select [Custom] for
[Stock], you can change the settings on this screen.
[Height]
This setting shows the height set for the stock that you selected. If you select [Custom] for
[Stock], you can change the settings on this screen.
[Media type]
This setting shows the sensor set for the stock that you selected. If you select [Custom] for
[Stock], you can change the settings on this screen. You can select [Continuous labels],
[Labels with gaps], or [Labels with black marks].
[Rotation]
You can set the print rotation angle as [0° - Portrait], [90° - Landscape], [180° - Portrait], or
[270° - Landscape].
[Mirror label]
You can specify printing to be a mirror image.
75