Signal Words And Symbols Used In Warnings - DURKOPP ADLER PURE 967 Operating Instructions Manual

Requirements
to be met by
the personnel
Operation Check the machine during operating for any externally visible
Safety
equipment
Signal words Signal words and the hazard they describe:
8
All the warnings and safety signs on the machine must always be
in legible condition. Do not remove!
Missing or damaged warnings and safety signs must be replaced
immediately.
Only qualified specialists may be used for:
• Setting up the machine
• Performing maintenance work and repairs
• Performing work on electrical equipment
Only authorized persons may work on the machine and must first
have understood these instructions.
damage. Stop working if you notice any changes to the machine.
Report any changes to your supervisor. Do not use a damaged
machine any further.
Safety equipment should not be disassembled or deactivated.
If it is essential to disassemble or deactivate safety equipment
for a repair operation, it must be assembled and put back into
operation immediately afterward.
2.2 Signal words and symbols used in
warnings
Warnings in the text are distinguished by color bars.
The color scheme is based on the severity of the danger.
Signal words indicate the severity of the danger.
Signal word Meaning
DANGER (with hazard symbol)
If ignored, fatal or serious injury will result
WARNING (with hazard symbol)
If ignored, fatal or serious injury can result
Operating Instructions 967 PURE - 00.0 - 12/2020
Safety