Stamina DT Plus Rower Owner's Manual page 10

ASSEMBLY INSTRUCTIONS
STEP 5
Insert the HANDLEBAR(13) through the HANDLEBAR SLEEVE(48). Slide the FOAM GRIP(46) onto the
protruding end of the HANDLEBAR(13).
NOTE: Lubricate the HANDLEBAR(13) with a small amount of liquid soap or water for easier installation
of the FOAM GRIP(46).
STEP 6
Insert the PEDAL STOPPER BAR(4) through the tube located on the MAIN FRAME(1) and position it at
the center. Lock the PEDAL STOPPER BAR(4) in position with ROUND HEAD BOLT(M6x1x10mm)(93).
Press the ROUND PLUGS(ø16mm)(61)
STEP 7
Push the BOTTLE HOLDER(39) into the gap of the LEFT and RIGHT COVERS(37, 38). Attach the BOTTLE
HOLDER(39) to the LEFT and RIGHT COVERS(37, 38) with ROUND HEAD SCREWS(ST4.2x16mm)(72).
into both ends of the
13
39
72
72
61
PEDAL STOPPER BAR(4).
48
37
93 1
10
46
38
4
61