Draytek Vigor2762 Quick Start Manual page 14

please:
Select the other modem code via WAN General Setup page

(WAN>>General Setup>>WAN1) and test if the one can get SHOWTIME
with the line.
Or, download the other firmware from DrayTek Website

(www.draytek.com).
DrayTek provides several firmware files. Each firmware has 2 different
DSL modem codes.
When the used modem code cannot get SHOWTIME, please try the
different DSL modem codes in other firmware files and see if it can get
SHOWTIME with your line.
5 . 2 Q u i c k S t a
5 . 2 Q u i c k S t a
The Quick Start Wizard is designed for you to easily set up your router for
Internet access. You can directly access the Quick Start Wizard via Web
Configurator.
Make sure your PC connects to the router correctly.
Open a web browser on your PC and enter http://192.168.1.1. A pop-up window
will open to ask for username and password. Please enter "admin/admin" as the
Username/Password and click Login.
Note You may either simply set up your computer to get IP dynamically from
the router or set up the IP address of the computer to be the same
subnet as the default IP address of Vigor router 192.168.1.1.
r t W i z a r d
r t W i z a r d
8