Draytek Vigor2762 Quick Start Manual page 10

Interface Description
Restore the default settings.
Usage: Turn on the router (ACT LED is blinking). Press the hole
Factory Reset
and keep for more than 5 seconds. When you see the ACT LED
begins to blink rapidly than usual, release the button. Then
the router will restart with the factory default configuration.
USB1~USB2 Connector for a USB device (for 3G/4G USB Modem or printer).
GigaLAN1~LA
Connectors for local networked devices.
N4
Connector for accessing the Internet.
DSL
I / O Power Switch.
PWR Connector for a power adapter.
4