Table of Contents
Advertisement
About this task
The management GUI requires a supported web browser (see "Checking your web
browser settings for the management GUI" on page 53).
Procedure
To add an expansion enclosure to your system, complete the following steps.
1. Install support rails for the new enclosure.
2. Install the new enclosure in the rack.
3. Connect the expansion enclosure attachment cables.
4. Connect the power cables and wait for the SAS light-emitting diodes (LEDs) to
illuminate.
5. Start the management GUI.
6. Go to Monitoring > System.
7. On the System page, select Actions > Add Enclosures.
8. Continue to follow the on-screen instructions.
63
Chapter 3. Configuring the system
Hide quick links:
Advertisement
Table of Contents
